Prospective evaluation of a novel device for ultrasound-guided percutaneous treatment of carpal tunnel and trigger finger disease. Efficacy and safety of sono-instruments®.

PURPOSE: To evaluate the safety and effectiveness of percutaneous release procedures under sonography using Sono-Instruments® in the treatment of carpal tunnel syndrome (CTS) and trigger finger (TF). METHODS: Prospective study involving 30 patients, divided into two groups (15 CTS, and 15 TF). The primary outcomes were surgical performance-related outcomes (visibility, ease of use, satisfaction, duration) using Sono-Instruments® and patient-related outcomes (pain, activity limitations, time to return to work, functional scores). Secondary outcomes included complications. Patients were followed for two months post-operatively. RESULTS: In the CTS group, the average age of the patients was 58.7 years. The percutaneous release of the transverse carpal ligament was effectively completed in all cases, with excellent device performance and no adverse events. At one week, all patients could wash their hands, 80% could perform activities of daily living, and 80% of those working had returned to their activities. At two months, all patients had resumed all activities. Pillar pain was still present in 53.3%. In the TF group, the patients had an average age of 57.9 years. The percutaneous release of the A1 annular pulley was successful in all cases, with excellent device performance and no adverse events. At one week, all patients could wash their hands, 93.3% could do all activities of daily living, and 75% of those working were back to their professional activities. At two months, all patients were back to all activities of daily living and work. The DASH score was significantly improved at two months, compared to preoperative, for both groups (p < 0.001). CONCLUSION: Percutaneous sono-guided release using Sono-Instruments® is safe and efficient, and associated with quick functional recovery. LEVEL OF EVIDENCE: II.

Retrograde Percutaneous Release of Trigger Finger or Thumb Using Sono-Instruments®: Detailed Technique, Pearls, and Pitfalls.

Percutaneous release is a common treatment option for trigger finger stenosing tenosynovitis. While surgical and conservative treatments are available, percutaneous techniques offer several advantages, including faster recovery time, reduced complications, and simultaneous treatment of multiple trigger fingers. The sono-instrument is a minimally invasive device designed for surgical release of the A1 pulley in adults. The device is efficient and safe, and in addition, several design features enhance the visibility of the instrument under ultrasound imaging. The technique is truly percutaneous, as the whole operation is done through a single needle puncture. This minimizes postoperative discomfort and allows an immediate return to daily living and professional activities. The technique can be performed in an outpatient clinic under local anesthesia. The learning curve is quick; however, surgeons must acquire experience in hand sonography to master this new form of surgery. The aim of this article is to provide an in-depth exposition of the technical nuances, pearls, and pitfalls of this novel retrograde percutaneous release method. To our knowledge, this is the first retrograde truly percutaneous release technique yet described, facilitated by the novel Sono-Instruments®.

Volar Ganglion Cyst and Echo-Guided Assistance for the Arthroscopic Removal.

The ganglion of the wrist is very common but with uncertain prognosis. The arthroscopic resection seems to improve the result compared with open procedure, in decreasing recurrence and morbidity. Volar ganglions are close to the radial artery, the flexor pollicis longus tendon, and even the median nerve. Ultrasonography combined with arthroscopy offers incomparable safety for the resection of volar ganglions. The technical steps of this combined procedure are described, and the first published series are discussed.

Cost-Effectiveness of Sonography-Guided Surgery.

Percutaneous carpal tunnel release (CTR) is a new surgical technique allowing to cut the transverse carpal ligament under sonography, without skin incision. The technique is safe, offers good functional results and early return to daily activities. This study investigates if percutaneous CTR is also cost-effective. Percutaneous CTR presents many advantages and may be safer than open and endoscopic CTR. This study could not demonstrate that it allows also cheaper surgery, at least as compared to open CTR. However, if it allows earlier return to work, percutaneous CTR could offer a major economic advantage over other techniques, particularly open surgery.

Percutaneous Sonographically Guided Release of Carpal Tunnel and Trigger Finger: Biomechanics, Clinical Results, Technical Developments.

The interventional use of sonography is growing fast, and percutaneous sonographically guided release is more and more used as minimally invasive treatment of carpal tunnel syndrome as well as trigger finger digit. The benefits of these procedures seem promising in clinical studies, but biomechanical studies comparing these procedures with open classical surgery are scarce. Minimally invasive releases of carpal tunnel and trigger finger could limit the phenomenon of tendon bowstringing observed after open surgery. A new model is presented to compare the biomechanical effects of open and sono-guided carpal tunnel and trigger finger releases.

Arthroscopically Assisted Eaton-Littler Trapeziometacarpal Ligamentoplasty.

Background Eaton-Littler ligamentoplasty has proven its efficacy in the treatment of trapeziometacarpal (TMC) instability. Description of Technique In this article, we describe the arthroscopically assisted Eaton-Littler ligamentoplasty through two clinical cases. Patients and Methods Arthroscopy is used to accurately place the metacarpal bone tunnel and pass the slip of flexor carpi radialis tendon in the latter. This procedure avoids soft-tissue dissection and could improve the outcome of this well-known surgery. Results The two clinical cases showed good short-term outcome with a decrease of pain and good function. Conclusions Arthroscopy to assist Eaton-Littler TMC ligamentoplasty is technically feasible, allowing a less invasive surgery. A larger prospective controlled study with a longer term outcome is mandatory to assess the real advantages of this modified procedure.

Treatment of supracondylar humeral non-union by bone autograft and Hoffmann II external fixation.

Supracondylar humeral nonunions are difficult to heal by internal fixation. Prosthetic arthroplasty is a solution in elderly patients. Both therapeutic options are contraindicated in the case of an infection. The article reports bone autografting and Hoffmann humero-humeral and temporary humero-ulnar Hoffmann external fixation. In our series of seven cases, there was only one minor complication, a benign pin-site infection. There were neither neurovascular complication nor loss of reduction. Solid bone healing was obtained in all patients after an average of 5.2 months (range, 2.5 to 6 months). External fixation is a form of "biologic" fixation, as there is no implant apposed on the bone fragments, preventing their revascularization. This easy technique allows to correct the preoperative deformity while providing sufficient stability to allow active mobilization. Temporary elbow bridging does not seem to cause significant stiffening of the joint.

Surgical management of rickets-like bone deformities (knock-knee and bow-leg) in children in sub-Saharan Africa.

Rickets-like deformities of the lower limb (knock- knee or bow-leg) are very frequent in sub-Saharan Africa. A prospective study was carried out over a period of 5 years. Forty-eight children were treated surgically for rickets-like deformities. The surgical technique was guided growth using a tension-band plate (eight plate). One patient was lost to follow- up. The technique failed in two cases (absence of correction in one case and hypercorrection in one case). Five patients are still under follow-up with progressive correction and were excluded from the study. A full correction was achieved in 40 patients (73 knees). There were 33 bilateral and 7 unilateral deformities. The deformities were knock-knees in 20 cases, bowlegs in 18 cases and there were 2 windswept deformities Good correction was obtained after a mean time of 11.4 months for genu varum and after a mean time of 12.4 months. The two windswept deformities were corrected after 8 and 9 months respectively. The guided growth technique using eight plate is effective as well in Africa. The needed material is not expensive if a two-hole tubular plate is used with two 3.5 screws.

Joint contact areas after radial head arthroplasty: a comparative study of 3 prostheses.

BACKGROUND: Contact stresses of radial head prostheses remain a concern, potentially leading to early capitellar cartilage wear and erosion. In particular, point contact or edge loading could have a detrimental effect. The purpose of this study was to compare 3 different types of radial head prostheses in terms of joint contact areas with each other and with the native situation. The hypothesis was that the joint contact areas would be lower after monopolar arthroplasty. METHODS: Seven fresh-frozen cadaveric upper limbs were used. Radiocapitellar contact areas of a monopolar design, a straight-neck bipolar design, and an angled-neck bipolar design were compared with each other and with the native joint. After standardized preparation, polysiloxane was injected into the loaded radiocapitellar joint to create a cast from which the joint contact area was measured. Measurements were performed at 3 angles of elbow flexion and in 3 different forearm positions. RESULTS: In the native elbow, contact areas were highest in supination. Elbow flexion had no significant effect on native and prosthetic joint contact areas. Contact areas were decreased for all types of arthroplasties compared with the native joint (from 11% to 53%). No significant contact area difference was found between the 3 designs. However, bipolar prostheses showed lateral subluxation in neutral forearm rotation, resulting in a significant decrease in the contact areas from pronation to the neutral position. CONCLUSIONS: All types of radial head prostheses tested showed a significant decrease in radiocapitellar contact area compared with the native joint. Bipolar designs led to subluxation of the radial head, further decreasing radiocapitellar contact.

Effects of humeral shortening on the three-dimensional configuration of the brachial plexus: a cadaveric study.

This study reports the gains in length of nerves after three different humeral shortenings. Ten brachial plexuses were dissected. The lengths of the different parts of the brachial plexus were measured using a three-dimensional digitizing system after humeral shaft shortenings of 2, 4 and 6 cm and after a standardized force of 0.588 N was used to apply tension to the plexus. The feasibility of nerve suturing was studied. Humeral shortening allowed for significant gains in lengths of the musculocutaneous (42 mm), median (41 mm), ulnar (29 mm) and radial nerves (15 mm). A 2 cm humeral shortening allowed a 2 cm nerve gap to be directly sutured in 70% to 90% of cases. This study suggests that humeral shortening could allow direct suture of nerve defects, or shorten the length of nerve grafts required to bridge a gap.

A New Clinical Sign of Lumbrical Plus Finger.

Paradoxical finger extension is the classical clinical presentation of the lumbrical plus syndrome. We report a new additional sign, increased metacarpophalangeal flexion of the involved finger when the patient tries to make a fist. Three cases of lumbrical tightness are discussed, illustrating this new sign in 3 different clinical settings. The new sign was present in all 3 cases. Lumbrical tenotomy corrected the paradoxical interphalangeal extension and partly the increased metacarpophalangeal flexion. The lumbrical tendon has a relatively high moment arm relative to the metacarpophalangeal joint, which could explain the basis of this clinical sign. This new physical examination sign may help in diagnosing the lumbrical plus syndrome, a subtle complication of flexor digitorum profundus lesions that is not easily diagnosed but which is easily addressed.

The effect of humerus diaphyseal shortening on brachial plexus tension: a cadaver study.

PURPOSE: To assess the extent to which diaphyseal shortening of the humerus can allow direct suture in case of rupture or transection injuries of the brachial plexus. METHODS: The use of 3 fresh cadaver specimens allowed for the study of 6 brachial plexuses. Distance measurements were made between reference points placed on the clavicle and on different parts of the plexus. Those measurements were repeated after shortening the humerus by 2, 4, and 6 cm. RESULTS: None of the dissected plexuses had classic anatomy. A humeral shortening of 6 cm allowed for a statistically significant reduction of length between the supraclavicular part of the plexus and the terminal branches, which did not exceed 17 mm on average. The difference of length was much greater for the specimen in which the musculocutaneous nerve did not pierce the coracobrachialis muscle proximally. CONCLUSIONS: In clinical situations, nerve defects are usually larger than the gain observed when doing a 6-cm humeral shortening. Moreover, this procedure implies a large dissection, a functional loss of certain muscles, and a risk of humeral nonunion. CLINICAL RELEVANCE: In the absence of extensive nerve dissection, the observed change of length is insufficient in the most brachial plexus disruptions to allow for a direct suture instead of long nerve grafts.

Radiocapitellar joint contacts after bipolar radial head arthroplasty.

PURPOSE: The purpose of this study was to determine radiocapitellar contacts before and after radial head replacement, using the bipolar design of Judet. METHODS: Joint contacts were measured by moulding the joint surfaces of 6 fresh-frozen cadaveric specimens, in various positions of elbow flexion and forearm rotation. RESULTS: Expressed as function of the radial cup, contact areas averaged 44% in the normal elbow, decreasing with flexion and increasing with supination (P < .05). After prosthetic implantation, contact areas averaged 33% and remained quite similar, irrespective of elbow position. Subluxation of the prosthetic head over the lateral margin of the trochlea was seen systematically with supination. CONCLUSIONS: Because of intraprosthetic mobility, contact areas were not dependant on elbow position. This adaptability, however, also led to abnormal positioning of the prosthetic radial head with supination, subluxing over the trochlea lateral margin.